3D PLA Silk Filament - Diameter 1.75mm - 1kg Spool - Blue Color

SKU: se25101409094934083

25.32€

Shopping Security

PLA SILK filament (1.75mm) is a European-made filament for 3D printers using FFF/FDM technology. PLA SILK has been enhanced with added polymers that give the material its high level of light dispersion and reflection, achieving the silky surface finish that defines this filament. Based on PLA as its main material, it maintains the properties and advantages of standard PLA (easy modeling, absence of warping, and low shrinkage) and even surpasses it in some aspects, as it has greater mechanical and thermal resistance than PLA. Features: -1.75mm diameter. -1000 gram spool. General Printing Parameters: -Nozzle temperature (between 200°C and 230°C) -Bed temperature (between 50°C and 70°C) -Fan: ON (100%) Physical Properties: -Density: 1.24 g/cm3 -Flow rate: 8 g/10 min (ISO 1133-A) -Flow rate: 3 g/10 min (ISO 1133-A) -Sterochemical purity: 96 (% L-isomer) -Residual monomer: 0.3% (max) -Humidity (Coulometric Karl Fisher): 400 (max) ppm -Melting temperature: 155°C Tm (DSC) -Crystal transition temperature: 55-60°C Tg (DSC) Properties Mechanical: -Tensile modulus: 3500 MPa (ISO 527-1) -Tensile strength: 45 MPa (ISO 527-1) -Yield stress: 5% (max) (ISO 527-1) -Charpy notched impact at 23°C: ?5 kJ/m2 (ISO 179-1eA) 3D print sample not included. Suitable for use in the following printers: PLA-HD 3D Filament Yield: 1.75 mm / 1 kg